Brother FAX8200P Trouble Error Codes List

Code	Description
71	Laser scanner motor does not lock.
72	Cannot detect Beam Detect signal.
73	No toner cartridge loaded.
74	Toner empty.
75	In-house temperature error.
76	Fixing heater harness disconnected or broken.
77	Heater thermister short circuit.
78	Heater thermister harness disconnected or broken.
79	Toner thermister disconnected or broken.
80	Paper size setting error.
82	Paper feeding error.
83	Paper jam. The registration sensor remains ON.
84	Paper jam. The paper ejection sensor remains ON.
85	No paper cassette loaded.
86	No 2nd paper cassette loaded.
88	Paper jam. Even after the registration sensor has gone OFF, the paper ejection sensor still stays OFF.
8B	Overheating error.
A1	Top cover opened.
A2	Document too long to scan.

A3	Document not detected by the document rear sensor.
A4	50% or more faulty of white level data.
A7	One-line feeding time-out error.
A8	One-line scanning time-out error.
A9	Abnormal scanning reference voltage.
AC	Less than 50% faulty of white level data.
B1	CODEC LSI error.
B7	A/D converter reference voltage error (at High level).
B8	Amplifier gain error.
B9	Light emission intensity error of the LED array.
BA	Scanning error: The left-hand black reference line which is marked on the document pressure bar for scanning width setting is not detected.
BB	Scanning error: The right-hand black reference line which is marked on the document pressure bar for scanning width setting is not detected.
BC	Scanning error: Reduction miss
BD	Scanning error: Enlargement miss
D1	The MODEM setup bit sticks to High.
D2	CTS stays OFF or ON if the MODEM RTS is turned ON or OFF, respectively.
D3	Bit B1A of the MODEM stays OFF.
D4	Bit RX of the MODEM stays OFF.
D5	The MODEM fails to complete the command transmission sequenc

D6	No MODEM interrupt for 60 seconds.
E1	Microprocessor (MPU) error on the control panel PCB.
E4	Out of recording paper.
E5	Recording paper set error.
E6	Write error in EEPROM.
E8	Data scanning error during transmission.
EA	Document removed at phase B.
F3	Voice message recording or playing-back not started.
F4	Peripheral CNG detection adjustment error.
F5	EOL not found in page memory transmission mode.
F6	PC interface error.
FF	Interface error of page memory command.

Error Code,Service Manuals, Error Code Serivce Manuals For All Copy machine And Printers,
Brother Error Code, Sanyo Error Code,Samsung Error Code,Roland Error Code, Riso Error Code,
Riso Error Code, Ricoh Error Code, Panasonic Error Code, Oki Error Code,Muton Error Code,
Minolta Error Code,Mimaki Error Code, Lexmark Error Code, Kyocera-Mita Error Code,Konica Error Code, Kip Error Code,Hp Error Code, Epson Error Code, Cannon Error Code,
Brother Service Manuals, Sanyo Service Manuals,Samsung Service Manuals,Roland Service Manuals,Riso Service Manuals,Riso Service Manuals, Ricoh Service Manuals, Panasonic Service Manuals, Oki Service Manuals,Muton Service Manuals,Minolta Service Manuals,Mimaki Service Manuals, Lexmark Service Manuals, Kyocera-Mita Service Manuals,Konica Service Manuals, Kip Service Manuals,Hp Service Manuals, Epson Service Manuals, Cannon Service Manuals,