Brother HL2280DW Trouble Error Codes List

Code	Description	Causes
0F	The back cover is open upon duplex-printing. (The back cover sensor is OFF)	1 Harness connection failure of paper eject sensor PCB ASSY. 2 The member part to press the back cover sensor which is located at the inner side of the back cover is broken. 3 The member part to press the back cover sensor which is located at the duplex tray is broken. 4 Back cover sensor failure. 5 Main PCB failure
1E	The drum unit will reach the end of life soon.	1 Main PCB failure
24	Internal temperature sensor error.	1 Harness connection failure of internal temperature sensor. 2 Internal temperature sensor failure. 3 Main PCB failure
36	Error in the high voltage power suply PCB while the machine is in the standby mode.	1 Main PCB failure
3B	Main PCB DRAM access error.	1 Main PCB failure
44	The toner cartridge is not installed.	1 Dirt on the electrode of the drum unit and on the machine. 2 Harness connection failure of high voltage power supply PCB. 3 High voltage power supply PCB failure. 4 Main PCB failure
50	Drum unit is at the end of life. (Continue printing)	1 Main PCB failure
56	The fuser cover is open.	1 Paper eject actuator catching on some position. 2 Paper eject sensor PCB failure. 3 Main PCB failure
57	Paper is jammed in the duplex paper feed path.	1 Foreign object around duplex tray. 2 Duplex tray failure. 3 DX gears damaged
58	Fuser unit error. (Some kind of fixing error occurs) (Warning)	1 Any fuser error occurs when started in the ready state.
59	Fuser unit error. (After the error code58 occurred, a failure in the fuser unit is detected again upon start-up.)	1 Harness connection failure between fuser unit connector and paper eject sensor PCB ASSY. 2 Harness connection failure between fuser unit connector and low voltage power supply PCB ASSY. 3 Harness connection failure between paper eject sensor PCB and main PCB. 4 Paper eject sensor PCB failure. 5 Low voltage power supply PCB failure. 6 Main PCB failure. 7 Fuser unit failure.
63	The toner cartridge is at the end of life.	1 New toner actuator catching on some position. 2 Harness connection failure of new toner sensor PCB. 3 New toner sensor PCB failure. 4 Main PCB failure
67	The toner cartridge will reach the end of life.	1 New toner actuator catching on some position. 2 Harness connection failure of new toner sensor PCB. 3 New toner sensor PCB failure. 4 Main PCB failure
6A	Fuser unit error. (The center thermistor does not detect 60°C within in the specified time.)	1 Fuser unit connector connection failure. 2 Fuser unit failure. 3 Low voltage power supply PCB failure. 4 Paper eject sensor PCB failure. 5 Main PCB failure
6B	Fuser unit error. (The center thermistor does not detect 100°C within in the specified time.)	1 Fuser unit connector connection failure. 2 Fuser unit failure. 3 Low voltage power supply PCB failure. 4 Paper eject sensor PCB failure. 5 Main PCB failure

Error Code,Service Manuals, Error Code Serivce Manuals For All Copy machine And Printers,
Brother Error Code, Sanyo Error Code,Samsung Error Code,Roland Error Code, RisoError Code,
Riso Error Code, Ricoh Error Code, Panasonic Error Code, Oki Error Code,Muton Error Code,
Minolta Error Code,Mimaki Error Code, Lexmark Error Code, Kyocera-Mita Error Code,Konica Error Code, Kip Error Code,Hp Error Code, Epson Error Code, CannonError Code,
Brother Service Manuals, Sanyo Service Manuals,Samsung Service Manuals,RolandService Manuals,Riso Service Manuals,Riso Service Manuals, Ricoh Service Manuals, Panasonic Service Manuals, Oki Service Manuals,Muton Service Manuals,MinoltaService Manuals,Mimaki Service Manuals, Lexmark Service Manuals, Kyocera-MitaService Manuals,Konica Service Manuals, Kip Service Manuals,Hp Service Manuals,Epson Service Manuals, Cannon Service Manuals,