Brother MFC7150C Trouble Error Codes List

Brother MFC7150C Trouble Error Codes List

Code	Description
23	Printer engine timeout.
25	Ink cartridges had already been loaded when the power was first applied.
31	The carriage cannot travel to the right or left.
32	After driven by the specified number of pulses, the carriage does not stop (since it cannot detect the left end of the travel).
33	The carriage movement parameter exceeded the travel range during printing.
34	When initialized, the carriage could not detect the right or left end of the travel range.
35	The carriage cannot move in midway of travel.
38	The carriage stop position is out of the travel range.
39	Printing area error.
3A	Sudden carriage stop during printing acceleration.
3D	The carriage has overridden the travel range.
41	The head drive voltage has not been turned from Low to High within the specified time.
42	The head drive voltage has not been turned from High to Low within the specified time.
43	The head drive voltage sticks to Low.
44	Head thermister broken.
45	Head thermister short-circuited.
46	The number of performed purge sequences has reached the limit.
4B	Abnormal carriage travel speed detected when the power was applied.
4C	Head rated voltage data stored in the EEPROM on the head PCB is invalid. (This code may appear only in the maintenance mode.)

50	The purge cam HP switch does not come ON even after the purge cam has been driven by the specified number of pulses.
51	The purge cam HP switch does not go OFF even after the purge cam has been driven by the specified number of pulses.
52	At the time of purge operation, the carriage has not stopped in the purge position.
53	The purge cam HP switch has come ON when the carriage was in the wipe position.
54	When reset, the purge cam HP switch does not come ON even after the purge cam has been driven by the specified number of pulses.
55	When reset, the purge cam HP switch does not go OFF even after the purge cam has been driven by the specified number of pulses.
82	Recording paper feeding error.
83	Recording paper jam. (The registration sensor sticks to OFF, indicating that paper has jammed.)
84	Recording paper jam. (The paper ejection sensor has detected a paper jam.)
88	Recording paper jam. (Even after the registration sensor has come ON, the paper ejection sensor does not detect paper.)
A1	Top cover opened.
A2	Document too long to scan.
A3	Document not detected by the document rear sensor.
A4	50% or more faulty of white level data.
A7	One-line feeding timeout.
A8	One-line scanning timeout.
AC	Less than 50% faulty of white level data.
B8	A/D voltage regulation error.
B9	Light emission intensity error of the LED array.

D5	The MODEM has failed to complete the command transmission sequence.
E4	Out of recording paper.
E6	Write error in EEPROM
E8	Data scanning error during transmission.
EA	Document removed at phase B
F3	Voice message recording or playing-back not started.
F6	PC interface error

Brother MFC7150C Trouble Error Codes List,Brother MFC7150C,Error Code,Service Manuals, Error Code Serivce Manuals For All Copy machine And Printers,
Brother Error Code, Sanyo Error Code,Samsung Error Code,Roland Error Code, RisoError Code,
Riso Error Code, Ricoh Error Code, Panasonic Error Code, Oki Error Code,Muton Error Code,
Minolta Error Code,Mimaki Error Code, Lexmark Error Code, Kyocera-Mita Error Code,Konica Error Code, Kip Error Code,Hp Error Code, Epson Error Code, CannonError Code,
Brother Service Manuals, Sanyo Service Manuals,Samsung Service Manuals,RolandService Manuals,Riso Service Manuals,Riso Service Manuals, Ricoh Service Manuals, Panasonic Service Manuals, Oki Service Manuals,Muton Service Manuals,MinoltaService Manuals,Mimaki Service Manuals, Lexmark Service Manuals, Kyocera-MitaService Manuals,Konica Service Manuals, Kip Service Manuals,Hp Service Manuals,Epson Service Manuals, Cannon Service Manuals,